Hammond B-3, Руководство пользователя для владельца

Страница: 18 / 149

8 I N T R O D U C T I O N
HA<O> ORGAN New B-3 / New C-3
Owner’s Playing Guide
Connecting the Leslie MAIN/ECHO Switch to the organ
1. Locate the MAIN/ECHO jack found on the Rotary Control Panel underneath the
manuals on the left side.
2. Plug the connector from the Leslie MAIN/ECHO Switch into the MAIN/ECHO
jack.
3. Mount the Leslie MAIN/ECHO Switch on the organ as shown in the diagram
under Connecting the Leslie Speed Switch.
You can connect up to four Leslie Speaker cabinets to one organ using “Y” cables and the
MAIN and ECHO connectors on the organ. To connect more than four cabinets, an
external Power Relay should be used to avoid damage to the Power Switch of the organ.
This accessory is available from your Hammond Dealer.
Connecting the Pedal Keyboard to the organ
Your Hammond Organ is supplied with a 25-note Pedal Keyboard which should be connected to
the organ. To set up the Pedal Keyboard:
1. Lay the Pedal Keyboard on the floor in front of the organ.
2. Locate the Pedal Keyboard connector cable, and plug it into the Socket found on
the Pedal Keyboard.
3. Secure the Pedal Keyboard connection by tightening the large screw opposite the
cable plug. This can be tightened by hand.
4. Carefully slide the Pedal Keyboard underneath the organ, and push it back all the
way as far as it will go.
When you have made all of the Basic Hook-Up connections described above, your Hammond
Organ will be ready to play.
ADDITIONAL NOTE: Connecting MIDI devices to the organ
Before turning the power to the organ "ON", any MIDI devices that you wish to use should be
connected. See the MIDI Section of this Guide for information on how to connect MIDI devices to
your organ.
The remainder of this Owner's Playing Guide will describe in detail the playing features of your
Hammond Organ.