Hammond B-3, Руководство пользователя для владельца

Страница: 17 / 149

7 I N T R O D U C T I O N
HA<O> ORGAN New B-3 / New C-3
Owner’s Playing Guide
Leslie Speed Switch
A Leslie Speed Switch is provided with your New B-3 or New C-3 Hammond Organ to allow
control of the Leslie Speaker rotors from the organ console. If you wish to move the location of the
Leslie Speed Switch:
1. Loosen and remove the two screws holding the Leslie Speed Switch to the
underside of the organ.
2. Mount the Leslie Speed Switch in the new location as shown in the diagram below.
Secure the cable using the clamps provided underneath the organ.
.
Connecting the organ to multiple Leslie
®
Speakers
Your New B-3 or New C-3 Hammond Organ has two 11-pin Leslie connectors, one marked
MAIN and the other marked ECHO, making it easy to connect multiple Leslie Speakers to your
organ. To do this:
1. Follow steps 1 through 3 under Connecting the organ to a Leslie Speaker to
connect the first Leslie Speaker.
2. Plug the female end of the Connector Cable into the receptacle on the back lower
left corner of the second Leslie Speaker.
3. Plug the male end of the Connector Cable into the 11-pin Leslie socket marked
ECHO.
NOTE: When connecting the New C-3, feed the female end of the other Leslie Cable through one of the round
cable holes on the organ cabinet, and plug the male end of the Connector Cable into the 11-pin Leslie socket
marked ECHO.
NOTE: Both the left and right sides of the organ cabinet are outfitted with cable holes in order to allow for
different placements of Leslie Speakers relative to the location of the organ console.
Leslie MAIN/ECHO Switch
When two Leslie Speakers are connected to the organ, the optional MAIN/ECHO switch
will allow the sound to come from only the MAIN cabinet, only the ECHO cabinet, or
both cabinets simultaneously.