ADJUSTMENTS
AND
TESTING
ANTEA 50 BT – BTS - BTO
Doc.
10059284
Issued
12/2016
Ver.
AC
Page
3 of 25
Steering wheel function – Alarm Table (following)
Allarm id.
Alarm Description
What to do
AL_18: Traction
Traction Current
Protection
High current consumption detected. Check
the
traction
motor
absorption
and
utilization.
Tract. Ammeter
AL_19: Traction
--------
Power stage read as damaged : if persist
replace the card.
Motor lecture
AL_21: General
Fault in turning on/off
sequence
Check connections of the connector of the
key. Swicth off and switch on again.
Key-off failure
AL_22: General
Main Relay Failure
Check the connections of the motors. If it is
ok, the main Relay is damaged. Replace the
electronic card.
Main Relay Fail
AL_23: General
Overvoltage.
Over voltage on electronic card. Check
batteries status and connections.
Overvoltage.
AL_24: Traction
Batteries not
connected to
electronic card.
Check batteries status and connections to
electronic card.
Batt. Connection
AL_25: General
No communication
between electr. card
and command bridge.
Check connections between the command
bridge and the electronic card.
Keyboard failure