Hammer B3 e-classic Скачать руководство пользователя

Страница: 2 / 96

Saw-Spindle Moulder

B3 / B3 e-classic

KR-FELDER-STR.1

A-6060 Hall in Tirol

Tel.: +43 (0) 5223 / 45 0 90

Fax.: +43 (0) 5223 / 45 0 99

E-Mail: [email protected]

Internet: www.hammer.at

Hammer

Attention!

The machine must be inspected immediately upon arrival. If the machine has been damaged during

transport, or if any parts are missing, a written record of the problems must be submitted to the forwarding

agent and a damage report compiled. Also be sure to notify your supplier immediately.

For the safety of all personnel, it is necessary to conscientiously study this manual before assembly and

operation. This manual must be kept in good condition, and should be considered as part of the machine.

Furthermore, the manual must be kept to hand and within the vicinity of the machine so that it is

accessible to operators when using, maintaining or repairing the machine.

A product of the FELDER GROUP!

Note: Year of construction

The machine number of this machine will be printed on this operating manual

The final two digits of the machine number show the year of construction of this machine

e.g. XXX.XX.XXX.17 -> Year of manufacture 2017

Important Notices!

Please note, that depending on the model of the machine, not all described functions are present, or additio-

nal functions and buttons are available (e.g. machines with special functions).

Содержание B3 e-classic

































































































Результаты поиска

Содержание B3 e-classic

Отзывы:

Похожие инструкции для B3 e-classic

Бренды по названию

Популярные бренды

Hammer B3 e-classic, Руководство пользователя

Результаты поиска

Содержание B3 e-classic

Отзывы:

Похожие инструкции для B3 e-classic

Бренды по названию

Популярные бренды