Hammer A2-26, Руководство по эксплуатации

Страница: 65 / 94

65
A2-26 Use
Thickness planing step 1 - infeed side
1
3
4
2
Fig. 50: Thickness planing - infeed side
1 Kickback guards
2 Processing direction when thicknessing
3 Start the cutterblock and feed
4 Lock the clamping lever (thicknessing table adjustment)
Material:
●
Super-Gleit
1. Take note of general procedures for permitted working methods.
linktarget doesn't
exist but @y.link.required='true'
2. Every time the machine is put into operation, test the kickback guards to
ensure that they are functioning properly.
3. Switch on the machine, start the drive motor.
The feed gear runs automatically when the drive motor is switched on.
6. Place the surface-planed side of the workpiece on the thicknesser table and
push into the machine until it is drawn in by the feed rollers.
7. Processing several workpieces:
●
Infeed roller standard:
with several workpieces being simultaneously processed:
Insert the two workpieces at each end of the transport roller.