35
Also, note that "
Incoming
" on this screen refer to traffic from the client (PC) viewpoint.
You have to firstly check
Enable
before you can add/edit an application.
Name
Enter the application name.
Incoming Type
Click the down arrow to select the incoming application type (TCP or UDP)
Incoming Start
Port
Type a port number or the starting port number in a range of port numbers.
.
Incoming Finish
Port
Type a port number or the ending port number in a range of port numbers.
Trigger Type
Click the down arrow to select the trigger type (TCP or UDP)
Trigger Start Port
Enter a port number as the starting outbound port for the special application defined in the
preceding field.
Trigger Finish Port
Enter a port number as the ending outbound port for the special application defined in the
preceding field.
Save
Press to save the new settings on the screen.
Undo
Press to discard the data you have entered since last time you press
Save
.
