20
DHCP
Client
Range
The starting address of this local IP network address pool. The pool is a piece of
continuous IP address segment. Keep the default value 192.168.1.1 should work for most
cases.
• Maximum:
253
. Default value 253 should work for most cases.
Note: If “Continuous IP address poll starts” is set at 192.168.1.1 and the “Number of IP address
in pool” is 253, the device will distribute IP addresses from 192.168.1.1 to 192.168.1.253 to all
the computers in the network that request IP addresses from DHCP server (Router)
Show
Client
Click to show Active DHCP Client table.
Save
After completing the settings on this page, click
Save
to save the settings.
Reset
Click
Reset
to restore to default values.
Password Setup
New Password
Maximum input is 36 alphanumeric characters (case sensitive)
Confirmed Password
Key in the password again to confirm.
Save
After completing the settings on this page, click
Save
to save the settings.
Reset
Click
Reset
to clear settings.
