29
Clone MAC Address
Your ISP may require a particular MAC address in order for you to connect
to the Internet. This MAC address is the PC’s MAC address that your ISP
had originally connected your Internet connection to. Type in this Clone
MAC address in this section to replace the WAN MAC address with the
MAC address of that PC.
Enable uPNP
Enable Ipsec pass through on
VPN connection
Enable L2TP pass through on
VPN conenction
Check to enable the listed functions.
Save
After completing the settings on this page, click
Save
to save the settings.
Reset
Click
Reset
to restore to default values.
Access Control
This screen allows you to block access to specified Internet services based on port number used. This
can be used restrict Internet access to only certain applications or to block applications you feel may
be harmful.
Enable Access Control
Select to enable Access Control function.
Select Services to Block
This lists all defined Services. Select the Services you wish to block.
Port Range
For TCP and UDP Services, enter the beginning of the range of port numbers
used by the service. If the service uses a single port number, enter it in both the
start and finish fields.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or service.
