11
Reset Button
This button has two (2) functions:
•
Reboot
. When pressed within 3~5 seconds, the power LED lights amber
then released, the Wireless Router will reboot (restart).
•
Clear All Data
. This button can also be used to clear ALL data and restore
ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. After Power On.
2. Hold the Reset Button down.
3. Keep holding the Reset Button more than 5 seconds, until the Amber LED
has flashed.
4. Release the Reset Button. The Wireless Router is now using the factory
default values.
About the Operation Mode
AP Mode
When acting as an access point, this device connects all the stations (PC/notebook with wireless network
adapter) to a wired network. All stations can have the Internet access if only the Access Point has the Internet
connection.
Bridge Mode
The WDS (Wireless Distributed System) function lets this access point act as a wireless LAN access point and
repeater at the same time. Users can use this feature to build up a large wireless network in a large space like
airports, hotels and schools …etc. This feature is also useful when users want to bridge networks between
buildings where it is impossible to deploy network cable connections between these buildings.
Repeater
Refer to the illustration below. While acting as Bridges, AP1 (with Station 1 being associated to) and AP2 (with
