Document #101-0079
13
11/30/17
The XE provides a diagnostic code for most problems. Upon any problem, the error code should be checked
first.
The display is only a single digit; therefore, to obtain the 2-digit error code, the first digit is displayed WITH
THE DECIMAL POINT (5.) and the second digit is displayed WITHOUT THE DECIMAL POINT (3).
The display will continue to flash the 2-digit error code; one digit at a time, until the failure is corrected or
power is removed.
During normal operation only the decimal point should flash. Do not be concerned if one of the segments
flashes once upon power-up or upon passing a valid bill.
The display is only a single digit; therefore, to obtain the 3-digit error code the first digit is displayed WITH
THE DECIMAL POINT (5.) and the second and third digits are displayed WITHOUT THE DECIMAL POINT
(3) (3). The display will continue to flash the 3-digit error code; one digit at a time, until the failure is
corrected or power is removed.
VII. ERROR CODES
