E-6
ALSR700 RECEIVER
FEATURES & CONTROLS
Gain control
Channel
button
CH1 & CH2 indicators
Power
Switch
Phone
jack
POWERING THE RECEIVER
Install “AAA” size x3pcs in battery compartment (#18) on the back of the receiver.
Observe polarity. To preserve battery life, always turn ALSR700 receiver off when not in
use. When the
POWER SWITCH
(#16) to turn on, the sound becomes weak or
distorted, replace battery. The life expectancy from an alkaline battery is
17-20
hours.
BATTERY WARNING
1
.
Be sure that the batteries are installed correctly. Wrong polarity may damage the
unit.
2. Use only the size and type of batteries specified.
3. Do not mix old and new batteries.
4. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
5. For better performance and longer operating time, we recommend the use of
alkaline-type batteries.
6. If the unit is not to be used for an extended period of time, remove the batteries.
Old or leaking batteries can cause damage to the unit and may void the warranty.
7. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions).
8. Do not dispose of batteries in fire, batteries may leak or explode.
OPERATING THE RECEIVER
Plug the included ALSB700 earphones into the phone jack (#12) on top of the receiver.
While wearing your earphones, stand near the ASLM700 transmitter.
