E-5
ALSM700 TRANSMITTER
The ALSM700 Transmitter operates using the supplied AC Adapter (Operate at
120V ~ 60Hz)
POWERING THE TRANSMITTER
NOTE:
Only use the supplied adapter
1. Insert the DC plug of the AC adaptor provided into the DC 5V jack (#2) on the back
panel of the transmitter.
2. Plug the other end into an AC wall socket.
WARNING :
Before connecting to the power supply, ensure that the supply
corresponds to the information on the rating label at the back of the apparatus.
3. Press
POWER SWITCH
(#5) on the power indicator (#6) will show power is getting
to the system.
4. The transmitter’s “signal” indicator (#7) will illuminate to confirm that the transmitter
is broadcasting.
5. Press
CHANNEL
button (#9) on the front panel to select transmitted channel both
channel indicator will light up.
SETTING UP THE TRANSMITTER
The 1/4”
LINE IN
jack (#1) enables you to connect directly from an audio source such
as a tape player.
MICROPHONE INPUT
the 1/4”
jack (#3) on the back of the transmitter is designed to
accept either dynamic or electret microphones.
