Technical Data Sheet
HBH550
ENG-FRM-RIC-4.32, Rev. E
PROPRIETARY RIGHTS NOTICE
This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential
and proprietary and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this
document and any information contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be
taken of any article fabricated or assembled from this document without the prior written consent of HBB.
Upper Housing Disassembly
Repair Guide
1- Using a Phillips head screwdriver remove the 11 screws that secure the upper housing.
2- Carefully lift up on the side of the upper housing closest to the power switch to partially to expose the control
panel/ PCB wiring and quick connect plug.
3- Disconnect the control panel quick connect plug from the PCB, then lift off the upper housing.
STEP 1
Remove
screws
STEP 2
Slightly lift to expose
cable
STEP 3
Disconnect cable
Upper Housing Removed
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Request Number:
Revision Date:
10/19/2016
Approved by:
Issue Code(s):
Page:
3
of
6
Document #:
Rev:
A
