11
10
Caring and Cleaning
(cont.)
Self-Clean
To keep the steam vents clear of any buildup, follow these
instructions each time you iron using steam.
1.
Set Temperature Control Dial to OFF. Fill iron with water
to 1/2 of its maximum capacity.
2.
Set Adjustable Steam Control to
0
(Dry Iron). Set Temperature
Control Dial to High temperature setting and let iron heat for
2 minutes.
3.
Set Temperature Control Dial to OFF. Unplug iron and hold
over a sink with soleplate facing down.
4.
Press and hold the Self-Clean Button. Boiling water and
steam will flow out of steam vents. Allow all water to drain
from iron.
5.
Gently move iron front to back to allow water to clean
entire soleplate area.
6.
If water still remains inside of soleplate, reheat iron as
indicated in Step 2. Boiling water and steam could still
flow out of steam vents.
Troubleshooting
Iron won’t
heat
PROBLEM
THINGS TO CHECK
• Is the iron plugged in and the outlet working?
Check the outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a
High, Medium, or Low setting?
• If automatic shutoff model, is the Auto Shutoff
Light flashing? Move the iron to reset.
Care and Cleaning
Iron Storage
1.
The water tank of your iron should be emptied after each
use. Turn Temperature Control Dial to OFF. Unplug the iron
and hold over a sink. Slowly tilt pointed end of iron down
over sink. Water will run out of water fill opening.
2.
After iron has completely cooled, wrap cord loosely around
iron and store in an upright position. Do not store iron laying
flat on soleplate.
Soleplate
1.
Never iron over zippers, pins, metal rivets, or snaps, since
these may scratch the soleplate.
2.
To clean occasional buildup on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3.
Always store iron upright in the heel rest position.
Spray Trigger
Press Spray Trigger to release
a fine spray of water for difficult
wrinkles in cotton or linen.
Features
(cont.)
840182701 ENv02.qxd:840144500 Ev02.qxd 2/4/11 3:28 PM Page 10
