14
Kibbe Assembly
ENTANGLEMENT HAZARD: Disconnect power before
cleaning, disassembling or assembling.
!
WARNING
NOTE
: Never use the Kibbe by itself.
This part must be used in combination
with the Front Ring Nut and Auger. The
two components of Kibbe cannot be used
separately. They must be used together,
as instructed below.
1. Insert the Auger into the Grinder Head,
Auger Driver end first.
2. Place the Kibbe components onto
the Auger Pin and ensure the pin of the
Kibbe fits into the notch position of the
Grinder Head. (
FIGURE A
)
3. Turn the Front Ring Nut clockwise
onto the threaded end of the Grinder
Head until it touches the Kibbe. Do NOT
overtighten the Front Ring Nut.
(
FIGURE B
)
4. Place the Tray on the upright part of
the Grinder Head. Never use the Grinder
without the Tray installed.
5. Now the appliance is ready for making
Kibbe. (
FIGURE C
)
FIGURE A
FIGURE B
FIGURE C
