background image

3

9. 

C

heck if the voltage indicated on the appliance corresponds to 

the local voltage before you connect the appliance.

10. 

D

o not use outdoors.

11. 

D

o not let cord hang over edge of table or counter, or touch 

hot surfaces, including the stove.

12. 

D

o not place on or near a hot gas or electric burner or in a 

heated oven. 

13. 

G

rinder must be operated on a flat surface away from the 

edge of the counter to prevent accidental tipping.

14. 

C

heck that the appliance is OFF ( ) before plugging cord into 

wall outlet. 

T

o disconnect, turn the control to OFF ( ); then 

remove plug from wall outlet. 

T

o unplug, grasp the plug and 

pull from the outlet. 

N

ever pull from the power cord.

15. 

A

void contacting moving parts.  

N

ever feed food by hand.  

A

lways use food pusher.

16. 

N

ever use fingers to scrape food away from the grinding plate 

while the grinder is in operation. 

S

evere injury may result.

17. 

D

o not operate the grinder without the tray in place.

18. 

N

ever feed food by hand. Always use the provided food 

pusher. 

K

eep fingers clear of the auger and cutting blades at 

all times. 

N

ever reach into the grinder. 

D

oing so may cause 

serious injury.

19. 

N

ever feed food with out the tray.

20. 

T

o reduce the risk of severe personal injury, and/or damage 

to the grinder, tie back loose hair and clothing, and roll up 
long sleeves before operating the grinder. 

R

emove ties, rings, 

watches, bracelets, or other jewelry before operating the 
grinder.

21. 

N

ever operate the grinder unattended. 

B

e safe. 

D

isconnect 

the grinder from power source before leaving the work area.

22. 

D

o not attempt to grind bones or other hard items. 

Содержание MG03




















Отзывы: