www.hameco.eu
HV-55 User Manual
hameco
33
Other parameters
Dimension (WxHxD)
254mm X 144mm X 174mm
Weight (approx.)
1.50kg
Operating environment
Indoor
Remote maintenance
(network port)
Remote upgrade, restart and reset
Standard accessories
12V/2.5A power, RS232 control line, remote control, operation manual, warranty
card
Optional accessories
Installation support
Operating temperature
-10C
o
~+50C
o
Ack/Completion Message
Command package
Notes
ACK
z0 41 FF
Returned when the command is accepted.
Completion
z0 51 FF
Returned when the command has been executed.
Error Message
Command package
Notes
Syntax Error
z0 60 02 FF
Returned when the command format is different or
when a command with illegal command parameters
is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due to
current conditions. For example, when commands con
-
trolling the focus manually are received during auto
focus.
10 VISCA PROTOCOL COMMAND LIST
When the camera is operated normally, we can control it via RS232C/RS485 port (VISCA IN). Parame-
ters of RS232C serial port are as follows:
Baud rate: 2,400/4,800/9,600/115,200 bit/s; start bit: 1 bit; digit bit: 8 bits; stop bit: 1 bit; verification
bit: none
After powering on, camera rotates to left bottom first, and then returns to middle. Zoom lens zooms
out to the furthest and zooms in to the nearest, and finishes self-inspection. If the camera saves #0
preset, after initialization, camera will go to #0 preset. Now user can use a serial port command to
control the camera.
Return command
z = camera 8