www.hameco.eu
HV-51 User Manual
hameco
39
Note: Please note the case-sensitivity of the user name and password.
If logging in with a common user name and password ,one does not have configuration privileges and
-
can only operate preview,playback,and log off.
4) Version upgrade
MCU version V2.0.0.16 2015-12-18
Camera version V2.0.0.16 2015-12-18
Focus version V2.0.0.6 2015-12-11
Users only read the version information above which is consistent with the menu version but cannot
modify.Different parts of the machine have different information.
Update file:
Click “Browse ...” installation,to select the upgrade file in the pop-up window.
Click on the “Upgrade” button,the upgrade dialogue will appear. The device will reboot automatically
after update successfully.
(Note: make sure the power and network is connected during the process or the upgrade will fail)
Note: After the version upgrade is complete, you need to restore factory defaults; a, through web to
restore the factory default configuration; b, through the recovery menu; c, through remote control
shortcut * # 6; Choose one of the above three ways. If chose a, the IP accounts, passwords also need
to be restored to the default.
5) Restore factory setting
Click on pop-up “Restore Factory Defaults” button and choose “yes” or “no”,then the device will restart
automatically and restore the factory setting .
6) Reboot
Click on the pop-up “Reboot” button and choose “yes” or “no”,then the device will restart automati-
cally.
4.2.8 Logout
Point “Logout” pop-up “Confirmation” dialog; select “Yes” or “No”,choose “Yes” to exit the current
page and return to the user login
interface again.
4.2.9 Wireless network
If the user’s equipment has a wireless network module, the “Network Configuration” has a “Wire
less
Network” configuration page,the specific configuration is as follows:
1【Network settings
Wireless network configuration:
Enable Network Interface:
can be checked, to set the following items after checking.
DHCP:
can be checked, once checked, if check,it can obtain IP automatically.
IP address:
set wirelss WIFI IP(default 192.168.1.250,if checked DHCP,IP can assign automatically)
Note:
wireless IP address can not be in the same segment with wired IP address.
Subnet Mask:
Set the wireless IP subnet mask (default255.255.255.0)
Default Gateway:
Set the wireless IP default gateway (default 192.168.1.1)
SSID:
The user can modify their own (the default test)
Encryption:
can check,the password can be set after checking.
