www.hameco.eu
HV-51 User Manual
hameco
34
4.2.5 Video configuration
1) Video encoding
Code stream:Stream:
Different video output mode setting, uses different streams.
(Main stream,secondary stream)
Compression Format:
Set the video compression format,save and reboot to take it effect (primary /
secondary stream default:H.264,H.265 optional)
Profile:
PROFILE MODE SETTING (DEFAULT HP；BP；MP OPTIONAL)
Video Size:
Set video image resolution,save and reboot to put it into effect (main stream default 1920
* 1080 or 1280 * 720 optional; default secondary stream 640 * 320,320 * 180,1280 * 720,1920 * 1080
optional )
Stream Rate control:
Set rate control mode,save and reboot to tput it into effect (Primary / secondary
stream default variable bit rate,fixed rate is optional).
Image Quality:
Set the image quality,image quality can be changed only when rate control is a variable
bit rate,(main stream defaulted is better,secondary stream default is not good,there are best,better,-
good,bad,worse,worst as for options).
Rate (Kb / s):
Set the video bit rate (main stream default 4096Kb / s,64-12288Kb / s optional; second
-
ary stream default 1024Kb /s,64-10240Kb / s optional).
Frame rate (F / S):
Set the video frame rate (primary / secondary stream default 25F / S,primary stream
5-60F/S optional,secondary stream 5-30F / S optional ).
Key frame interval:
Set the key frame interval (primary / secondary stream default 75F,primary /
stream 1-300F optional. secondary stream 1-150F optional).
Stream Name:
When streaming via rtsp or rtmp, user can modify stream name. Main Stream(live/av0),
sub stream(live/av1) Click the “Save” button to display the “saved successfully” message,then settings
take effect.
2) Stream Release
Switch:
To turn on/off the main / secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935,0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the “Save” button to display the “Save successful” message,then settings take effect.
Method of obtaining RTSP: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary
stream)
3,【RTP Broadcasting
Main/Sub Stream:
On/Off；
Protocol:
；RTP or TS
Address【Default:
224.1.2.3. It can be edited.
Port【Main Stream Default Port:
4000；Sub Stream Default Port: 4002；
Visit:
Address comes up after setting. Eg; rtp://224.1.2.3:4000；udp://@224.1.2.3:4000；
