![HAMECO 10X Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/hameco/10x/10x_user-manual_584835021.webp)
www.hameco.eu
HV-51 User Manual
hameco
21
1. Standby Key
After pressing for 3 seconds, the camera will step into standby mode. Press for 3 seconds
again, the camera will self-test again and go back to HOME position.
(Note: If power-on mode is turned on and Preset 0 is set, and there is no operation within
12s, it will automatically point to the specified preset position.)
2. Camera Address Selection
Select the camera address that you want to control.
3. Number Key
Set or run 0-9 presets
4,*,# Key
Key combination use
5. Focus Control Key
Auto Focus: Enter into auto focus mode.
Manual Focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus +] or [focus -] to adjust.
6. Zoom Control Key
Zoom;:Lens near
Zoom;:Lens far
7. Set or Clear Preset key
Set Preset: Set preset key + 0-9 number key:
Clear Preset key: Clear preset key + 0-9 number key
8. Pan/Tilt Control Key
Press Key :Up
Press Key :Down
Press Key :Left
Press Key: Right
“HOME” Key: Return to the middle position or enter into the next level menu
9. BLC Control Key
Back Light ON / OFF: Turn on or off the back light
10. Menu Setting
Open or close the OSD menu
Enter / exit the OSD menu or return to the previous menu.
11. Camera IR Remote Control Address Setting
;*;+;;;+;F1;:Camera Address No.1
;*;+;;;+;F2;:Camera Address No. 2
;*;+;;;+;F3;:Camera Address No. 3
;*;+;;;+;F4;:Camera Address No. 4
3.1 Remote Control
3.2.1 Key Instructions
12. Key Combination Functions
1) ;#;+;#;+;#;:Clear all presets
3) ;*;+;#;+;9;:Flip switch
5) ;*;+;#;+;3;:Menu set to Chinese
7) ;*;+;#;+Manual: Restore the default user
name, password, and IP address
9) ;#;+;#;+;1;: Switch the video format to 1080P50
11) #;+;#;+;3;:Switch the video format to 1080I50
13);#;+;#;+;5;:Switch the video format to 720P50
15);#;+;#;+;7;:Switch the video format to 1080P25
17);#;+;#;+;9;:Switch the video format to 720P25
2) ;*;+;#;+;6;:Restore factory defaults
4) ;*;+;#;+Auto: Enter into the aging mode
6) ;*;+;#;+;4;:Menu set to English
8) ;#;+;#;+;0;:Switch the video format to 1080P60
10);#;+;#;+;2;:Switch the video format to 1080I60
12);#;+;#;+;4;:Switch the video format to 720P60
14);#;+;#;+;6;:Switch the video format to 1080P30
16);#;+;#;+;8;:Switch the video format to 720P30