www.hameco.eu
HV-51 User Manual
hameco
22
3.2.2 Applications
Finishing initialization, it can receive and execute the IR commands. Press the remote controller button, the indicator light
isflashing; release the button, the indicator light stops flashing. Users can control the pan/tilt/zoom, setting and running
preset positions via the IR remote controller.
Key Instruction:
1. In this instruction, “press the key” means a click rather than a long-press, and a special note will be given if a long-press
formore than one second is required.
2. When a key-combination is required, do it in sequence. For example,“ ；*；+；#；+；F1；”means press“；*；”first and then press“
；#；” and last press“；F1；”.
1) Camera Selection
Select the camera address to control.
Up:
press Down: press
Left:
press Right: press
Back to middle position:
press“；HOME；”
Press and hold the up/down/left/right key, the pan/tilt will keep running, from
slow to fast, until it runs to the endpoint; the pan/tilt running stops as soon
as the key is released.
ZOOM IN:
press “ZOOM “ key
ZOOM OUT:
press “ZOOM ” key
Press and hold the key, the camera will keep zooming in or zooming out and
stops as soon as the key is released.
Focus (near):
Press “；focus+；” key (Valid only in manual focus mode)
Focus (far):
Press “；focus-；”key (Valid only in manual focus mode)
Auto Focus:
Support
Manual Focus:
Support
Press and hold the key, the action of focus will keep continue and stops as soon
as the key is released.
2) Pan/Tilt Control
3) Zoom Control
4) Focus Control
