Hamamatsu Photonics C9525 SERIES, Инструкция по эксплуатации

Страница: 33 / 35

@X4-0047-5
－ 33 －
6. Maintenance and Inspection
6.1.
Maintenance and inspection
To use this product safely, perform periodic maintenance and inspections as explained below.
Carefully read the precautions described in this manual and comply with the instructions to
ensure safe use.
If a failure is found or suspected in this product, check the contents of section 6.2, "Repair" and
then contact our local sales office. When you return this product back to us for repair, pack it
carefully so that it is will not be damaged during shipping and add a description of the failure.
Please acknowledge that we accept no responsibility for any damage caused during shipping.
If this product gets wet or oil or dust gets inside, the electrical insulation will deteriorate leading to
hazardous situations such as electrical shock or fire. If this product becomes wet or
contaminated with oil or dust, then immediately stop using it and contact our sales office for
repair service.
Cleaning the unit
Gently wipe away dirt on the unit with a soft, dry cloth. Never use chemical solvents such as
benzene, alcohol, acetone, ether, ketone, thinner and gasoline. Using such solvents will cause
deformation or discoloration.
6.2. Repair
If a failure is found in this product, contact us with the specific symptom and a detailed description
of the trouble, as well as the product model number and production lot number. We will make
every effort to repair the product in as short a time as possible. In the following cases however, the
repair might require additional time and extra costs or its repair might even be refused.

1. The product was purchased a long time ago.

2. The maintenance parts used in the product are not in current production.

3. The product was modified or altered

4. The product was severely damaged.

5. Other unavoidable factors