Hamamatsu Photonics C9525 SERIES Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 35

background image

@X4-0047-5

－ 15 －

The C9525 can be controlled by using the buttons and slide bars on this screen.

■

To set a high voltage

Clicking the small arrows at the ends of the horizontal scroll bar changes the

voltage value in ±1 V steps and clicking the slide bar changes the voltage

value in ±100 V steps. The upper voltage setting is limited by the maximum

voltage setting. After adjusting to the desired high voltage, click the SET

button to enable that setting.

■

To set a maximum voltage

Clicking the small arrows at the ends of the horizontal scroll bar changes the

voltage value in ±1 V steps and clicking the slide bar changes the voltage

value in ±100 V steps. After adjusting to the desired high voltage, click the

SET button to enable that setting.

■

To set the step voltage

Clicking the small arrows at the ends of the horizontal scroll bar changes the

voltage value in ±1 V steps and clicking the slide bar changes the voltage

value in ±100 V steps. After adjusting to the desired step voltage, click the

SET button to enable it.

■

To read the monitor voltage Vmon

Click the READ button under "Vmon" to read and display the monitor voltage.

■

To read the low-voltage power supply voltages

Click the READ button under "AUX" to read the low voltages (±5V and ±15V)

output from the connector on the rear panel.

The voltage values are shown in the Response box.

■

To set the LCD contrast

Move the horizontal slide bar to adjust the LCD contrast.

After adjusting the contrast, click the SET button to enable that

contrast.

■

To set the LCD backlight to ON/OFF

Click the ON/OFF button to switch the backlight on or off.

■

To set the high-voltage output switch LED to ON/OFF

Click the ON/OFF button to switch the LED on or off.

«
...
13
14
15
16
17
...
»

Содержание C9525 SERIES




































Отзывы:

Нет отзывов

Похожие инструкции для C9525 SERIES

Бренд: YIHUA Страницы: 2

Бренд: Valex Страницы: 8

Бренд: Akyga Страницы: 4

Бренд: Makita Страницы: 13

Бренд: Wacker Neuson Страницы: 156

Бренд: Icom Страницы: 2

CYBERCORE 1000 PLATINUM

Бренд: XPG Страницы: 50

Weller Pyropen Jr.

Бренд: Cooper Hand Tools Страницы: 31

Бренд: Hakko Electronics Страницы: 2

Бренд: Energenie Страницы: 45

Бренд: Gardner Denver Страницы: 27

Бренд: M-PT Страницы: 19

Бренд: Master Appliance Страницы: 2

Бренд: Parkside Страницы: 65

Бренд: e+p Страницы: 2

Бренд: Walter Страницы: 60

Бренд: METREL Страницы: 9

Бренд: P.I.T. Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды