Hamamatsu Photonics C10507 Series, Инструкция по эксплуатации

Страница: 3 / 31

< 2 >
WARNING
■
Stop using if an abnormal condition occurs.
If smoke, unusual odors, abnormal noise or heat are noticed while operating this product,
immediately stop using it. Continuous operation under such abnormal conditions may cause fire or
electrical shock. Immediately turn off the PC connected to this product and then unplug the USB
cable. After making sure that no abnormal condition has disappeared, contact our sales office.
Never attempt to repair on your own since it is dangerous.
■
High voltage hazard!
This module includes a high-voltage power supply needed to operate the MPPC. The high-voltage
power supply is coated with silicone resin to prevent electrical shock. Do not remove the coating
material or touch internal parts of this product.
■
Do not apply vibrations or shocks to this product.
Excessive shocks or vibrations may damage the internal components or adversely affect their
adjustments, causing fire or electrical shock.
■
Always connect this product to a USB port.
This product is designed to connect to a USB port on a PC. Fire or electrical shock may result if
used at a voltage higher than the USB voltage.
■
Do not disassemble.
Do not disassemble any part of this module. Changing the adjustment or modifying this module may
cause malfunctions and lead to fire or electrical shock.
■
Keep away from water or any liquid.
Electrical shock or damage may occur if the module gets wet.
■
Handle the cables properly.
Avoid placing any heavy objects on the cable or bringing a heater close to the cable. Do not pull on
the cable itself when disconnecting it. Doing so might damage the cable and cause fire or electrical
shock.