Hamamatsu Photonics C10507 Series, Инструкция по эксплуатации

Страница: 5 / 31

< 4 >
Handling precautions
Before using this product, be sure to read the following precautions to ensure correct and safe use.
■
Do not use organic solvent such as thinner and acetone for cleaning.
Use a soft dry cloth to
wipe the surface of this product clean.
■
Ceramics Series (-xxxC) Cleaning.
Since the window of this product is made with soft resin, don’t push nor touch the window surface by
the hard or tip object.
If the window needs to be cleaned, use ethyl alcohol and wipe off the window gently.
■
Install the evaluation software in your PC only after you accept the terms in the
"Software license
agreement" . Do not connect this product to the PC before installing the evaluation software.
Otherwise, the software installation may fail. (See the description in "Setup" for how to install the
software.)
■
Power to this product is supplied from the USB port on the PC.
■
Due to the USB specifications, the maximum power that can be supplied from one USB port is
limited to 5 V, 500mA. Avoid connecting two or more units to one USB port through a hub.
Current consumption[mA]
MPPC Module 200
■ Power saving function and screensaver.
Depending on the PC model, the power supplied from the USB port might be interrupted when the
power saving function or screensaver is activated. In this case, this product also stops operation
and might create problems when the PC returns from power saving or screensaver mode.
If power to your PC is interrupted in this same way while connected to this product, disable the
power saving function and screensaver. (For PC functions and settings, see the PC operation
manual.)