Hama DR1410BT, Руководство по эксплуатации

Страница: 12 / 16

9
8.2 Search / Automatic search
•
Press [ NAVIGATE/ENTER ] to start a station search.
• The radio stops the search and starts playback when it
finds a station.
• Press [ NAVIGATE/ENTER ] again to continue the search
until the next station is found.
8.3 Manual station search
With manual station settings, you can
define the required frequency yourself
and also receive stations that had signals too weak
to pick up on the automatic station search and which
therefore
were not included.
• Press [ NAVIGATE/ENTER ] to switch to the manual
station settings.
• Turn [ NAVIGATE/ENTER ] (left: - 0.05 MHz / right: +
0.05 MHz) until the desired frequency is displayed. Wait
a moment until playback of the received station signal
begins.
8.4 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
Note
Presets cannot be deleted. If all 30 station memory slots
are filled and you wish to save a new station, choose
one of the occupied slots. The station in this slot will be
overwritten with the new station.
8.4.1 Assigning the list of presets (1-30)
•
Set the station that you would like to save to a presets
memory slot.
• If the station is playing, press and hold [ ] (3) for
approx. 3 seconds until the Presets list opens up.
• Navigate to the preferred memory slot and confirm your
selection by pressing [ NAVIGATE/ENTER ](9).
• The selection will be confirmed by the display showing
"Program (1-30, depending on the memory slot) saved".
8.4.2 Calling up a station from the presets list (1-30)
•
Press [ ] to call up the Presets list.
• Use [ NAVIGATE/ENTER ] (9) to navigate to the
preferred station and confirm your selection by pressing
[ NAVIGATE/ENTER ].
8.5 Bluetooth
®
• When Bluetooth ® mode is enabled for the first time, the
radio is immediately in "Pairing mode" and visible to
other devices. You can therefore pair the radio with your
smartphone, for example, and begin transmitting from
the relevant source device.
• If the radio has already been paired to a smartphone, the
next time Bluetooth
®
mode is enabled, the connection is
automatically established.
• To pair a new radio, press the [ NAVIGATE/ENTER ]
button (9) or call up the Bluetooth
®
menu via the
[ SETTNG ] button (4) and select "Pair new device".
To learn how to operate the radio during Bluetooth
®
playback, consult the Control Panel.
8.6 AUX IN
•
AUX IN mode allows a cabled connection to be
established between another audio source and this
device. The volume can be controlled via this radio. All
other operations are carried out via the connected audio
source.
8.7 Audio setting
For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You
can enable this function in the menu, and the radio will
automatically switch to mono reception when signal
quality is poor. To change the audio setting, proceed as
follows:
• Press [ ] (4) to access the Settings menu.
• Use [ NAVIGATE/ENTER ] (9) to navigate to the "Audio
settings" menu item.
• Confirm the selection by pressing [ NAVIGATE/ENTER ]
and choose your preferred setting.
9. Sleep
The radio has a timer function, which switches the radio
to standby mode after a pre-defined length of time,
regardless of its operating mode.
• Press [ ] (4) to access the Settings menu.
• Use [ NAVIGATE/ENTER ] to navigate to the menu item
"Main menu" -> "Routine" -> "Sleep timer".
• You can set the timer value with [ NAVIGATE/ENTER ].
• Confirm the setting by pressing [ NAVIGATE/ENTER ].
• If the sleep timer is activated, this is indicated in the
playback screen by [ ].