8
7.4 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
7.4.1 Assigning the list of presets (1-30)
•
Set the station that you would like to save to a presets
memory slot.
•
If the station is playing, press and hold
[ ]
(2) for
approx. 3 seconds until the Presets list opens up.
•
Navigate to the preferred memory slot and confirm your
selection by pressing [
NAVIGATE/ENTER
].
•
The selection will be confirmed by the display showing
"Program (1-30, depending on the memory slot) saved".
Note
Presets cannot be deleted. If all 30 station memory slots
are filled and you wish to save a new station, choose
one of the occupied slots. The station in this slot will be
overwritten with the new station.
7.4.2 Calling up a station from the Presets list (1-30)
•
Press
[ ]
to call up the Presets list.
•
Use [
NAVIGATE/ENTER
] to navigate to the preferred
station and confirm your selection by pressing
[
NAVIGATE/ENTER
].
7.5 DRC (Volume adjustment)
Some DAB network radio stations support a volume control
feature that actively takes effect during playback. If the
volume suddenly increases, DRC automatically lowers it. If
the volume suddenly becomes quieter, DRC automatically
raises it. The same happens when playback is suddenly
quiet. The radio then increases the volume again.
Volume adjustment high:
total equalisation of different
volumes. Strong compression can audibly reduce the
dynamics of a music title.
Volume adjustment low:
partial equalisation of different
volumes. More subtle compression, without too much loss
of dynamics.
Volume adjustment off:
no equalisation
Proceed as follows to do the settings:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER
] (9) to navigate to the "Volume
adjustment" menu item.
•
Confirm the selection by pressing [
NAVIGATE/ENTER
]
and choose your preferred setting.
8. FM
From the main menu or after pressing [ ] repeatedly,
activate operating mode
FM (FM Radio)
on the radio.
Stations that broadcast additional information regarding
the station and the programme, are highlighted on the
display with an RDS icon (Radio Data System).
This additional information is displayed by pressing
[ ]
.
8.1 Search setting
The search setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search. Proceed as follows:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER
] (9) to navigate to the "Scan
settings" menu item.
•
Confirm the selection by pressing [
NAVIGATE/ENTER
].
•
To have the search run stop only at stations with high
signal strength, select
Available stations only
.
Otherwise, the search run will stop at every station for
which a signal is received.
Note
By default, the "All stations" method is selected.
Содержание DR1410BT
Страница 3: ...A B 2 3 4 5 1 6 7 8 9 2 1 3 4 5...
