8
ECOVENT Operating Instructions
ECO
V/1
120
12/re
v1/EN
Section 2 – Operation
2.3 Cleaning and Maintenance
Safety:
2.3.1. Before cleaning or carrying out maintenance on the
condensate hood, ensure the power supply is disconnected.
Information:
2.3.2. The baffle filters should be removed and cleaned in a
dishwasher regularly, at least every two weeks.
Experience could suggest more frequently, dependant on
contaminant
build
up.
2.3.3. The condensate hood casing should be cleaned of
contaminant build up, inside and out, with a hot mild cleaning
solution and dried with a towel.
2.3.4. No corrosive or highly caustic alkaline cleaners or
sourcing cleaning solution should be used.
2.3.5. The removable mesh moisture eliminators should
be cleaned with a hot cleaning solution regularly, at least every
four weeks, or as experience suggests.
2.3.6. The cold water mist nozzles should be checked for operating
and the apertures cleaned with fine wire, when required.
2.3.7. To remove baffle filters, lift and swing bottom away from
you. Pull out top first. To remove mesh moisture eliminators grab
knobs and pull towards you. To refit reverse procedures.
2.3.8. Once a year the condensate hood should be checked by a
technician.
2.3.9. Troubleshooting:
•
Fan does not run
•
Check if power plug is connected and
main switch is on
•
Call customer service
•
Fan always runs in high speed, or
never in high speed.
•
Has the door magnet been fitted, and if
so, is it in the right position?
•
Call customer service
•
Steam and vapor is not condensed
•
Ensure water is connected to the hood
Safety:
2.3.9 Under no circumstances must unqualified personnel
attempt any repair of servicing within the back panel section
of the condensate hood. Risk of electric shock which can cause
serious injury or death. If technical difficulties are experienced
contact
your
local
service
agent.
