Instruction Manual REG 21
20
6.2.1 Notes on setting switching value parameters.
Switching values can be entered as decimal figures; each place must be set
individually, proceeding as follows and beginning with the “function and parameter
code” (see fig. 9):
Press the enter key
to open the parameter settings dialog (
1
).
The current value is displayed; the numbers of the final decimal place will be
flashing (
2
).
Continue as follows until you have reached and set the +/- place:
Press
to set the flashing digit (or +/- sign) (
3
).
Press the enter key
to return to the decimal places (
4
).
Press the enter key
to complete the setting process (
5
).
Press one of the set keys (
or
) to save the values (6).
The instrument will display the function and parameter ID for the next parameter (7).
Example: Setting the switch-on value for switching output 1
Fig. 9
The on and off values for each switch must have a min. difference of 2
digits to make sure that the switching output will work correctly. For an
unstable signal a larger difference will give better results.
flashing
multiple times
flashing
flashing
flashing
display
multiple times
save
(
2
)
(
4
)
flashing
flashing
flashing
(
3
)
(
5
)
(
6
)
(
7
)
(1)
(3)
(4)
(3)
