halstrup-walcher REG 21, Инструкция по эксплуатации

Страница: 22 / 25

Instruction Manual REG 21
22
8 Technical data
Measurement data
measurement ranges

0 ... 50 Pa to

0 ... 100 kPa;
see rating plate
measurement principle inductive
change in volume
0.1…0.3 mL
overload capacity 200x (for measurement ranges < 2.5 kPa)
600 kPa (for measurement ranges > 2.5 kPa)
linearity ± 1%
± 0.5 % (optional for measurement ranges > 250 Pa)
temperature-dependent drift in
measured values 0.04% / K (+10° to +50°C)
temperature-dependent drift in the
zero point 0.04% / K (+10° to +50°C)
zero-point drift over time 0.5 %/year
Ambient conditions
medium air, all non-aggressive gases
operating temperature +10° to +50°C
storage temperature -10° to +70°C
relative humidity 0 ... 80 %
EMC standards EN 55011; EN 61000-4-3, EN 61000-4-6
conformity
declaration of conformity available upon
request
Electrical data
power consumption 3 VA
supply voltage options
standard 230 V-AC, +6 % / -15 % (50...60 Hz)
(optional) 24 V-AC, 115 V-AC, +6 % / -
15 % (50…60 Hz)
(optional) 24 V-DC, +20 % / -15 %
analogue output
standard
0..10 V (RL
≥

2 k
Ω
)
(optional) -5 ... 5 V; 0 ... 20 mA; 4 ... 20mA
time constant 1 sec. (standard), 2.5 and 10 s may be set by user
switching outputs
standard 2 floating changeover relays; up to 230 V-Ac (50/60
Hz), 6 A w/ ohmic load
(optional) 2 bipolar NPN transistors; U
CE
< 50 V; I
C
< 200 mA,
floating
time delay to analog output none / 20 ms (standard)
electrical connections 12-pin terminal strip
connected cross-sections 0.5 ... 2 mm
2