Instruction Manual PSx3xxEC
10
2.7
LEDs
The following LEDs are located under the transparent sealing plug:
P1/P2
: green link LEDs for ports 1 and 2
ECAT
: EtherCAT STATUS LED (green/red; see EtherCAT spezification)
V-Motor
: The LED is illuminated yellow when power is available to the motor.
PSx30xEC, PSx31xEC-8
PSx32xEC, PSE31xxEC
PSE34xxEC
PSx31xEC-14, PSx33xEC
.
If the device names are given
without
the diameter of the output shaft (-8, -
14), the relevant information is valid for
all
offered output shafts (applies
throughout the document).
‘x’ in the device name stands for a number in the range 0..9. ‘xx’ in the
device name stands for a number in the range 10..999.
Meaning of the LEDs:
1) Each of the ports (P1/P2) has one associated green LED
for the “Link” state and
one for the “Activity” state.
For each port the following states are possible:
- off
no line connection
- on
line connection is active, no data activity
- flickering with 10 Hz
line connection is active, data activity
2) green/red EtherCAT-status LED
- for this status LED see EtherCAT-spezifications
3
) The yellow “motor” LED indicates the motor power supply:
- off
Motor power supply too low or too high
- on
Motor power supply well
flashing
Motor power supply well, PSx in delivery state