Halstead EDEN X Type VBX 30, Инструкции по установке и обслуживанию

Страница: 35 / 43

41
FAN MOUNTING SCREWS
4 SCREWS
GASKET
42
MANIFOLD MOUNTING SCREWS
44
BURNER GASKET
43
WITHDRAWING BURNER
LOCATING TAB
BURNER
9.5
Refer to Figures 42, 43 & 44
a) Ensure supply voltage is isolated, and that the gas supply is isolated.
b) Remove the gas control valve, fan & burner assembly; refer to
section 6.2.
c) Unscrew the three torx screws, (T-25), holding the manifold to the
combustion chamber front cover, and remove the manifold; refer to
Figure 42.
3 TORX
SCREWS
33
FAN
9.4
Refer to Figures 37, 40 and 41.
a) Ensure supply voltage is isolated, and that the gas supply is isolated.
b) Remove the gas control valve, fan & burner assembly; refer to
section 6.2.
c) Remove the gas control valve; refer to section 9.3.
d) Unscrew the three screws holding the gas valve mounting plate,
remove plate; refer to Figures 36 and 40.
e) Unscrew the four screws holding the fan to the burner manifold, and
remove fan; refer to Figure 41.
f) Attach and secure the replacement fan, replace the gasket.
g) Re-assemble in reverse order; ensure that all joints and seals are
correctly re-fitted.
40
GAS VALVE MOUNTING PLATE
3 SCREWS
GAS VALVE
MOUNTING PLATE
SINGLE PAGES 20/9/10 10:01 Page 35