Copyright © 2023 Halogen Systems, Inc. All rights reserved worldwide.
5
Step 2: Install the D20 display/controller
To perform D20 installation, you will:
▪
▪
▪
Configure the electrical connectors and fittings
▪
MOUNT THE ENCLOSURE
Place the D20 on a flat surface, like a workbench. The maximum area needed for the D20 enclosure and the
opened front cover is shown below:
There are two ways to install (mount) the D20 at the site:
▪
Mount to a wall or
▪
Mount to a pole
TO MOUNT THE D20 TO A WALL
With the cover closed, carefully place the D20 on a flat work surface exposing the back of the enclosure.
1.
Depending on the wall surface, you can align the mounting tabs vertically (L) or horizontally (R). Remove the
four screws that secure the mounting tabs, reorient the tabs, and reattach the tabs onto the D20’s base.
2.
Attach the enclosure to the wall with the appropriate wall-mounting screws (not included) that will firmly
hold the enclosure to the wall. Make sure that all four corner mounting tabs are attached.