3
English
Read this manual before operating or maintaining this product. Set methods and procedures to educate and train
your staff on the safe operation or maintenance of this product.
CAUTION
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
NOTES
• This manual is a permanent part of the product and should remain with the product.
• Halo continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual.
If you have any questions, contact HALO Customer Service or Technical Support at 888.999.HALO (4256).
PRODUCT DESCRIPTION
The HALO Bassinest® Hospital Series swivel sleeper consists of a base tower, removable basin storage bin and work
surface, 2 side-storage caddies, locking caster wheels, a clear bassinet tub and mattress. The bassinet tub allows for
easy access to the infant/newborn patient by rotating and swiveling for easy positioning and by its ergonomically
friendly retractable side wall.
INTENDED USE
The HALO Hospital Bassinest is designed to be a sleeping surface for infant/newborn patients. The top surface of
the device raises and lowers to allow easier access to the infant/newborn. The HALO Hospital Bassinest was also
designed for in-hospital transport within newborn labor/delivery units, postpartum units, medical surgical units
treating high risk pregnancy patients, NICU’s, and any other patient areas within a hospital where a newborn infant
may be treated and/or cared for during hospital admissions.
This product is
NOT INTENDED
for patients that can crawl or reposition themselves independently.
CONTRAINDICATIONS
None known.
INTRODUCTION
!
SERIAL NUMBER LOCATION
You can find the serial number underneath
the Bassinet bed.
SETUP
1.
Remove all shipping and packaging materials
from the product prior to use.
2.
Remove and discard the shipping screw located on the tower/lift column of the Bassinest.
3.
Remove tape from removable basin storage bin.
4.
Unpack and Install two side storage caddies on each end of clear bassinet tub.
5.
Remove mattress from packaging. Clean and disinfect the mattress before installing the mattress with a pillow case.
6.
Clean and disinfect the entire unit.
7.
Place mattress in a tight fitting sheet or pillowcase.
8.
Run through operation steps to ensure unit is in working order upon delivery.
23400 Bassinest Hospital Owners Manual.indd 3
2/26/19 9:31 AM
