2: Installing the Maya2000 Series
8
020-00000-000-02-201603b
Configuring the Maya2000Pro Series
Spectrometers
The Maya2000Pro Series spectrometer can be used with OceanView software when connected to the
USB port.
If you have followed the previous steps and started your software, the spectrometer is already acquiring
data. Even with no light in the spectrometer, there should be a dynamic trace displayed in the bottom of
the graph. If you allow light into the spectrometer, the graph trace should rise with increasing light
intensity. This means the software and hardware are correctly installed.
Consult your spectrometer operating software manual for detailed instructions on operating your
spectrometer (see
OceanView QE
Pro
Acquisition Controls
In OceanView, the Acquisition Parameter Controls allow you to set the desired parameters for the Maya.
Optional Shutter
►
Procedure
To enable the optional shutter,
