020-00000-000-02-201603b
7
Chapter 2
Installing the Maya2000Pro
Series Spectrometers
Overview
You must install the operating software application prior to connecting your Maya2000Pro Series
Spectrometer to a computer. The Ocean Optics OceanView spectrometer operating software installs the
drivers required for the Maya2000Pro Series spectrometer installation. If you do not install the software
first, the system will not properly recognize the Maya2000Pro Series.
If you have already connected the Maya2000Pro Series to the computer prior to installing the operating
software, consult
Chapter 3:
for information on correcting a corrupt Maya2000Pro
Series installation.
Maya2000Pro Series Installation
This section contains instructions for connecting the Maya2000Pro Series Spectrometer to a computer.
►
Procedure
Follow the steps below to connect the Maya2000Pro Series to a computer via the USB port:
1. Install the spectrometer operating software on the destination computer.
2. Locate the USB cable (USB-CBL-1) provided with the Maya2000Pro Series Spectrometer.
3. Insert the square end of the cable into the side of the spectrometer.
4. Insert the rectangular end of the cable into the USB port of the computer.
If you installed OceanView prior to connecting the spectrometer, OceanView installs the spectrometer
drivers. If the drivers do not successfully install (or if you connected the spectrometer to the computer
before installing OceanView), consult
Chapter 3:
Once you install the software and hardware, and establish your sampling system, you are ready to take
measurements.
