manualshive.com logo in svg

Halex QUIKSTRAP, Инструкция по эксплуатации, Страница: 2 / 20

Поделиться
Скачать
Halex QUIKSTRAP Скачать руководство пользователя страница 2

2

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. 

Failure to follow all instructions listed below could result in death and/or serious 

personal injury. Read, understand and follow all safety warnings and instructions 

provided with this product. Failure to follow the warnings and instructions could 

result in death or serious injury. Save all warnings and instructions for future 

reference. 

ABOUT THIS MANUAL 

This manual contains important sections relative to user safety, tool use and tool main-

tenance. Therefore, make sure this manual is present at all times for all users. Extra 

copies, free of charge, are available online at quikstrap.com or by calling 1-800-

749-3261.

This manual contains important safety and operating instructions that must be read 

and understood before operation begins. Following are some universal caution state-

ments that must be observed during operation of the tool:

Table of Contents

Page

1. Product Description

3

2. Safety Rules

3 - 5

3. Safety Instructions for Staplers

6 - 7

4. Stapler Operation Instructions

8 - 15

5. Staple Specifications

15

6. Stapler Maintenance & Battery Disposal

15

7. Troubleshooting

16

8. Re-order Information

17

9. Limited Warranty

17-19

= Safety Alert Symbol

NEXT BUSINESS DAY SERVICE POLICY

If you should experience a  
problem with your Halex

®

 product...

CALL:1-800-749-3261

If we can’t resolve the issue over the phone, we will have a replacement in 
your hands the next business day. Simply give us a call.

Avoid Injury.

Read and understand 

owner’s manual before

operating this product.

CAUTION

Avoid Injury.

Wear eye protection.

CAUTION

Avoid Injury.

This tool ejects sharp 

fasteners.

CAUTION

Содержание QUIKSTRAP





















Отзывы:

Нет отзывов