FoamLogix, Model 2.1A and 1.7AHP Class
“A”
Electronic Foam Proportioning Systems
57
4. Start the Hale FoamLogix foam pump by pressing
the red
ON
button.
The LEDs on the horizontal bar graph lights as
the foam pump begins operating at approximately
two-thirds speed, pumping foam concentrate into
the container.
The display shows the volume of foam
concentrate being pumped.
5. STOP the foam pump and accurately measure
the amount of foam concentrate collected.
6. Adjust the reading on the display to match the
volume actually pumped using the
or
button.
7. Repeat the procedure to verify the setting is
correct.
8. Set the bypass valve handle back to
INJECT
position.
Record Foam Pump Feedback Calibration
Factor
1. Press and release the
i
button.
The display shows
FA xxx
,the foam pump
feedback calibration factor. (See Figure 33:
“Display - Foam Pump Feedback Calibration
Factor.”)
2. Record this value for future reference. This
factor must be programmed into the display if
the display is ever replaced.
FOAM PUMP FEEDBACK CALIBRATION
FACTOR:
Figure 33: Display - Foam Pump Feedback Calibration
Factor
The display show
PASS
, then clears.
2. While continuing to hold the display button
enter the password (
).
3. The display shows
SCAL
for several seconds and
then cycles through the start-up sequence
followed by the flow display
O
. (See Figure 34:
“Display - Exit and Save Calibration.”)
This completes verification and adjustment of the
system. The Hale FoamLogix system is now ready
to be placed in service.
EXIT AND SAVE CALIBRATION
1. To exit calibration and save the set values,
press and hold the
i
button.
Figure 34: Display - Exit and Save Calibration
Press and
release -
SCAL
is shown
Press and
release - the
feedback factor
is shown
Содержание FoamLogix 1.7AHP
