59
To change the ‘Preset’:
o
Make sure the correct source is
highlighted in the
Source Setup
menu.
o
From the
Source Setup
menu, use the
UP or DOWN keys to highlight ‘Preset’.
o
Use the LEFT RIGHT keys to change
the setting.
o
Once the setting is correct, use the
UP DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save and
return to the
Main Menu
.
Analog monitor
Analog monitor
Analog monitor
Analog monitor
Analog Monitor is a link to a special screen
mode, which can be seen only using On
Screen Display (OSD). Analog sensitivity
adjusts the input gain of the analog to digital
converter for each input source.
Note: The adjustment range is from –5 dB to
+10 dB with 1 dB steps.
For CD players and other sources with a
similar signal level we recommend a value
below 0 dB, since many players have
relatively high output levels. The 0 dB gain
setting ensures that a 2 V input signal level
does not distort.
Note: Always use the Analog Monitor mode
when setting up the analog sensitivity values.
To adjust the Analog monitor:
To adjust the Analog monitor:
To adjust the Analog monitor:
To adjust the Analog monitor:
o
Play some music that has high peak
levels and see if the signal clips.
o
Make sure the correct source is
highlighted in the
Source Setup
menu.
o
Make sure the correct source is
highlighted in the
Source Setup
menu.
o
From the
Source Setup
menu, use the
UP or DOWN keys to highlight
Analog
monitor
.
o
Once highlighted press ENT.Continue
as
follows:
o
Use the LEFT or RIGHT keys to adjust
the gain so that the signal never clips and the
peaks are located within a few decibels of the
0 dB level.
o
Use the UP or DOWN keys to change
the
scale
used.
SOURCE SETUP
Source
1
Title
SRC 1
Digital input
HDMI
Preset
No change
>
>
>
>
Analog monitor
Video type
HDMI1
Component bypass On
EXIT
INPUT LEVEL
Monitoring
0
-1
Gain: 0dB
-2
Peak: -1dB
-3
Press < or >
-4
to change
-5
sensitivity
-6
Press ENT to
-8
accept or EXIT
-10
to cancel
dBr
All manuals and user guides at all-guides.com
