46
To set up speaker sizes:
o
From the ‘Speaker Setup’ menu, use
the UP or DOWN
keys to highlight ‘Size
setup’ and press ENT.
o
Use the UP or DOWN keys to highlight
the speaker/channel size you want to adjust.
o
Use the LEFT or RIGHT keys to adjust
the size to your desired setting.
o
Use the UP or DOWN keys to highlight
EXIT and press ENT to return to the ‘Speaker
setup’ menu.
o
If setup is complete for all settings,
use the UP or DOWN keys to highlight EXIT
and press ENT to exit the Speaker setup,
followed by the
Main Menu
.
Note: The subwoofer crossover range is from
40 Hz to 140 Hz with 10 Hz steps. The
crossover frequency defines the frequency
below, which the low frequency signal does
not travel to small speakers, but is redirected
to large speakers and/or a subwoofer.
Subwoofer crossover filter can be bypassed
if the subwoofer’s own filter is to be used.
Enhanced Bass duplicates the subwoofer
information to both large speakers and
subwoofer. You may desire this in some
cases to get more bass from the system. By
selecting “Off”, the low frequencies will play
through the main left and right only. This
selection is preferred by THX.
Aux channel setup
Aux channel setup
Aux channel setup
Aux channel setup
‘Aux channel setup’ allows user configuration
of channel 9 and 10 outputs, also known as
‘Aux
channels’.
A
stereo
subwoofer
configuration is one of the most common
uses.
•
the setup procedure is the same for both
channels
•
if user defined configuration is selected,
mix levels and filter parameters can be
edited
•
‘Level’ sets the output level of the aux
channel
•
‘Delay’ allows the output signal to be
delayed for special effects or setting the
correct distance to the listening position
(Max. delay is 80 ms for aux channels,
where 1 millisecond corresponds to
approx. 1 ft or 0.3 m.)
AUX CHANNEL SETUP
>
>
>
>
Ch 9 config setup
-Level
0 dB
-Delay
0 ms
Ch 10 config setup
-Level
0 dB
-Delay
0 ms
EXIT
All manuals and user guides at all-guides.com
