18
The trigger outputs deliver 12 V DC. The
maximum total current (for the three
outputs) is 200 mA.
Only connect or disconnect
triggers when the power is off or
the unit is disconnected from
mains power, or the trigger
outputs may be damaged.
CAUTION: Halcro recommends
that
trigger
cables
be
a
maximum length of three meters
and to use shielded cable to
prevent
possible
radio
interference issues.
34 Component video inputs
Accept component video outputs from
video sources.
There are three component video inputs
in the SSP180 and four in the SSP220. All
component
video
inputs
can
be
associated to any of the sources in SRC1
to 10 in the
Source Setup
.
35 Component video outputs
Connect to the component video inputs
of the video display.
36 HDMI™ outputs
Connect to the HDMI™ input of your
video display unit.
(For display systems with DVI inputs a
HDMI™/DVI
adaptor
is
required.)
37 HDMI™ inputs
There are three high-definition multimedia
interface (HDMI™) inputs in the SSP180
and four in the SSP220.
All HDMI™ inputs can be associated to
any of the sources in the
Source Setup
.
38 USB control interface
Connects the SSP180/220 to a home
automation system or to a PC for
software updates.
Contact your dealer for details.
39 Analog audio inputs 1 to 10
Inputs for analog outputs of source
devices.
(Connections must always be made to
these inputs even when using only digital
sources [such as DVD players] to ensure
there is always a signal at the record
outputs.)
40 Tape input/output
Connectors
for
all
types
of
tape
recorders, including three-head types,
which allow you to monitor the signal
from the tape at the same time it is being
recorded.
41 Record outputs 1 to 2
These outputs carry the signal from the
currently selected analog stereo source
device (except the source connected to
the tape PLAY input or the 7.1 channel
input).
42 Zone B audio output
A stereo output used to send the Zone
signal from the SSP180/220 to a power
amplifier in another room.
All manuals and user guides at all-guides.com
