Page 16 of 29
TM
dm10
Remote Power Amplifier control Output
The dm10 has a remote power amplifier control output (fig 6,15) which will remotely switch
the HALCRO™ amplifiers from Standby to On. Cables can be purchased through HALCRO™
for details please email us at:
.
Bridging
The dm10 will control bridged power amplifiers. A bridging kit can be purchased through
HALCRO™ for details please email us at:
.
Break-in period
The dm10 does not require a break-in period. The electronic break-in period is completed at
the factory.
Programmable Input Selections
The dm10 has seven available pairs of programmable input connectors, three unbalanced,
three balanced voltage inputs and one unbalanced current input.
The Phono input is pre-allocated to the phono 'source' and can not be changed
Input
Modes
Required output
source impedance
Input impedance
Unbalanced current
input
RCA: Infinite source
impedance
50ohm input impedance
Balanced voltage input
XLR: Low source
impedance
10kohm input
impedance
Unbalanced voltage
input
RCA: Low source
impedance
10kohm input impedance
