Page 13 of 29
TM
dm10
Rear Panel
1. Phono Capacitance
selector
2. Phono Resistance
selector
3. Phono Ground
Terminal
4. Phono Gain Switch
5. Phono Cartridge
selector switch
6. Phono Stage inputs
7. Programmable inputs
8. Program buttons
9. Tape Monitor Output
10. Output sockets
11. Ground switch
12. Remote sensor
window
13. Main power switch,
mains socket and fuse
holder
14. Remote Power
Amplifier Control
output
15. Output selector
switch
1 & 2 Phono Resistance & Capacitance
selector:
Allows the user to precisely match
the dm10 to the capacitance and resistance
of the phono cartridge.
3. Phono Ground Terminal:
Will ensure
your phono unit is grounded when using
unbalanced inputs.
4. Phono Gain Switch:
Allows the user to
set the phono input x1, x2 or x4 to match the
output of the cartridge.
5. Phono Cartridge selector switch:
Allows
the user to choose between a moving
magnet or moving coil cartridge.
6. Phono Stage inputs:
Allows the user to
connect the turntable to either the Balanced
or Unbalanced inputs.
Figure 6
