Page 12 of 29
TM
dm10
Display
1. Main Information Display
2. Signal Source Indicators
3. Signal Source Location Indicator
4. Phase Indicator
5. Stereo Indicator
1. Main Information Display:
The
information provided on this display
changes depending on what function is
currently being processed.
In normal use it will display the volume
of both the left and right of the system
(fig 5).
When a different signal source is selected
it will appear on the main display for a
few seconds. (fig 3, fig 4).
2. Signal Source Indicator:
Displays the
signal source which is currently selected.
3. Signal Source Location Indicator:
Displays which input the signal source
has been connected to.
4. Phase Indicator:
Displays whether the
unit is in- or out-of-phase.
5. Stereo Indicator:
Displays whether
the unit is in stereo or mono mode.
Figure 2
Figure 3
Figure 4
Figure 5
