HAKO Hakomatic B115R Скачать руководство пользователя страница 9

Страница: 9 / 70

Safety Information

• Always disconnect the battery plug

before starting any work on the elec-

trical installation.

• It is not permitted to clean the vehicle

with a pressure washer or steam

blaster.

• It is not permitted to use aggressive

and corrosive cleaning agents.

• Allow the vehicle to dry after being

cleaned, e.g. over the weekend.

• Only start the vehicle up when all the

safety equipment has been installed

and brought to its protecting position.

• When working in the area of the

raised waste water tank, it must be

opened fully to prevent it accidentally

slamming shut.

1.5

Particular risks

Electronics

• Only use original fuses with the pre-

scribed amperage.

• In the case of defects in the electrical

installation, switch the vehicle off im-

mediately and clear the fault.

• Work on the electrical equipment

may only be carried out by electri-

cians who have received the neces-

sary training and in accordance with

the electrical engineering regula-

tions.

• The vehicle's electrical equipment

must be inspected/checked at regu-

lar intervals. Defects, such as loose

connections and cable damage,

must be rectified immediately.

Batteries

• Observe the information in the oper-

ating manual provided by the battery

manufacturer.

• Batteries may only be handled and

changed by properly skilled mainte-

nance personnel.

• Due to a change in the center of

gravity, only approved batteries may

be installed at the intended position.

• Never lay any metallic objects or

tools on batteries - risk of short cir-

cuit!

• Ensure sufficient ventilation in the

charging area when charging the

batteries – risk of explosion!

• To prevent creeping currents,

always keep the batteries clean and

dry and protect from becoming

soiled, e.g. by metal dust.

• Batteries must not be connected or

disconnected when live.

• When closing the seat console, pay

attention that no cables are dam-

aged.

• It is forbidden to eat, drink and

smoke in battery charging rooms.

• Wash you hands thoroughly after

handling batteries.

• For further safety information, see

supplementary sheet 88-60-2556 -

Notes on driving batteries.

Safety equipment
• Never operate the vehicle without

the hood being closed and locked

(safety regulation)!

Содержание Hakomatic B115R







































































Результаты поиска

Содержание Hakomatic B115R

Отзывы:

Похожие инструкции для Hakomatic B115R

Бренды по названию

Популярные бренды

HAKO Hakomatic B115R, Руководство по эксплуатации

Результаты поиска

Содержание Hakomatic B115R

Отзывы:

Похожие инструкции для Hakomatic B115R

Бренды по названию

Популярные бренды