HAKO Hakomatic B115R Скачать руководство пользователя страница 2

Страница: 2 / 70

Preface

Dear Customer,

We are certain that the excellent quali-

ties of the vehicle will justify the faith

you have shown in us through your pur-

chase.

Please read the Chapter "Safety Infor-

mation" prior to starting the vehicle to

ensure it is operated and used safely.

Your safety, and that of others, basical-

ly lies in your ability to control and oper-

ate the vehicle. Before using the

equipment for the first time, read this

original manual thoroughly, act accord-

ing to the information contained and

keep it in a safe place for future refer-

ence or subsequent owners. The oper-

ating manual contains all the most

important information regarding opera-

tion, maintenance and service.

Throughout this manual, texts which

concern safety are indicated by the cor-

responding danger pictogram. Should

you have any questions in respect of

the vehicle or operating instruction

manual, your authorized Hako dealer is

available to provide help at any time.

You are expressly advised that you

cannot base any legal claims on the in-

formation contained in this manual. En-

sure only original spare parts are used

should any repairs be necessary. Only

such original spare parts warrant that

the equipment is reliably ready to use at

all times. We reserve the right to make

technical modifications in the interest of

further development.

Valid as of: September 2011

Hako-Werke GmbH
D-23843 Bad Oldesloe
Hamburger Str. 209-239
Tel. ++49 (04531) 8060

Intended use

The Hakomatic B115R is a scrubber

dryer for the wet cleaning of hard floors.

Any use beyond this is regarded as im-

proper use. The manufacturer is not

considered liable for any damage re-

sulting from improper use; the user is

solely responsible for all the potential

risks involved. Intended use also in-

cludes maintaining and observing the

operating, maintenance and repair con-

ditions prescribed by the manufacturer.

The Hakomatic B115R may only be op-

erated, serviced and repaired by per-

sonnel who are familiar with the work

involved and are aware of the risks.

The applicable accident prevention

laws must be observed and any gener-

ally accepted health and safety direc-

tives must be maintained.

The

manufacturer is not deemed liable for

any damage resulting from unauthor-

ized modifications to the vehicle.

Introduction

Содержание Hakomatic B115R







































































Результаты поиска

Содержание Hakomatic B115R

Отзывы:

Похожие инструкции для Hakomatic B115R

Бренды по названию

Популярные бренды

HAKO Hakomatic B115R, Руководство по эксплуатации

Результаты поиска

Содержание Hakomatic B115R

Отзывы:

Похожие инструкции для Hakomatic B115R

Бренды по названию

Популярные бренды