HAKO Citymaster 650 страница 83 Скачать руководство пользователя

Страница: 83 / 190

03-147015-00-00.fm

Operation

3.3 Starting and driving the vehicle

Danger

•

Toxic engine exhaust gases! Inhaling exhaust gases is injurious to health and can lead to uncon-

sciousness and to death! Never let the engine run in enclosed spaces.

•

Danger to life in the danger area of the vehicle! Special caution is required under the raised tipper,

in the area of the front and rear attachment and in the area of the trailer.

•

Danger of tilting over when driving uphill or downhill and transversely to a slope! Avoid sudden

turns when driving uphill or downhill or across slopes. There is a risk of tilting over in an inclined

position! The vehicle speed must always be adapted to the surrounding conditions and the load

condition.

•

Danger of tilting due to wrong steering! Note that the steering behaviour of an articulated steered

vehicle differs essentially from that of a car. Sudden steering movements at high speed or too high

speeds when turning can cause the vehicle to tilt over.

•

Risk of accident! Note that there is a risk of skidding on unpaved ground or snow and ice. This can

lead to uncontrolled behaviour of the vehicle. Drive correspondingly carefully!

Warning

•

For reasons of safety, the vehicle is equipped with a seat contact switch and the function of the

seat contact switch must not be bypassed.

•

In the case of restricted vision, especially when reversing the vehicle, it is necessary to have a

second person who gives the driver appropriate signals. The second person must always be in the

field of view of the driver.

•

When working with the vehicle, pay special attention to third persons, especially children.

•

In transport journeys on public roads the working lights must be switched off.

Attention

•

If the engine oil pressure warning symbol

Fig. 98-A

in the multifunction display lights up with the

engine running, there is a risk of engine damage! Stop the vehicle in the safe range. Turn the

engine off immediately and check the oil level. Have the cause of the inadequate engine oil

pressure removed.

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды

HAKO Citymaster 650, Руководство по эксплуатации

Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды