HAKO Citymaster 650 страница 79 Скачать руководство пользователя

Страница: 79 / 190

03-147015-00-00.fm

Operation

3.2 Before start-up of the vehicle

Danger

•

Risk of accident! If the steering column is unlocked while driving, it can come unexpectedly out of

adjustment. You can then lose control over the vehicle.

•

Risk of accident! Adjust the driver's seat only when the vehicle is stationary. You will otherwise be

diverted from the traffic and could lose control over the vehicle by moving the seat. You could

cause an accident by this.

•

Risk of accident! A dirty, damaged seat belt or one stressed or changed in an accident may not

offer the intended protection. You could therefore suffer severe injuries or death in an accident.

Please check regularly that the seat belts are not damaged and not contaminated. Always have

damaged seat belts or those stressed in an accident renewed by an authorised workshop.

•

Risk of accident! Good viewing conditions contributing to traffic safety are guaranteed only if all

windows are free of ice, snow and condensation. Make yourself familiar with the correct operation

of the heating and ventilation system as well as de-moisturising/defrosting the windows. Maximum

heating power and fast thawing of the windows can be achieved only if the engine has reached its

operating temperature.

•

There is a risk of accidents when driving with open doors! The doors must remain closed when

driving on public roads and when working.

Warning

•

Check the vehicle for its correct condition and operating safety before using it. The vehicle must

not be used if it is not in order.

•

Before starting work, the operator must familiarize himself with all equipment, operating and

actuating elements as well as with their function. It is too late to do this during operation!

•

A warning triangle, a warning light, a warning vest and a first aid kit must be in the vehicle during

operation.

•

Sturdy and slip-proof shoes must be worn when working with the vehicle.

•

This device may not be used by persons (including children) with reduced physical or mental

abilities or by persons without sufficient experience and skills.

•

Carrying persons is not permitted!

•

Only those surfaces approved by the contractor or its authorised representative for use of the

vehicle may be driven on.

•

The vehicle is not suitable for removing dangerous, combustible or explosive liquids, dusts or

materials.

•

Observe the maximum gradability of the vehicle, see Technical data.

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды

HAKO Citymaster 650, Руководство по эксплуатации

Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды