HAKO Citymaster 650 Скачать руководство пользователя страница 68

Страница: 68 / 190

02-147015-00-00.fm

Use

2.3.11 Seat belt

The seat belt

Fig. 56-41

serves for the safety of the driver. The seat belt

assures complete freedom of movement when pulled slowly. However, it

is blocked in sudden braking. The seat belt can also be blocked when driv-

ing over potholes or other bumps in the road.

Putting seat belts on and off

Insert the buckle latch

Fig. 56-B

into the belt buckle

Fig. 56-C

until it

snaps in audibly (check by pulling). Tension the seat belt by pulling on the

end. The seat belt must always lie firmly against your pelvis.
Make sure you are sitting upright and the belt runs correctly!
To take off the seat belt hold it firmly and press the red button

on the belt

buckle

Fig. 56-C

. Guide the seat belt slowly up to the reel.

Danger

Risk of accident! A dirty, damaged seat belt or one stressed or changed in an accident may not offer

the intended protection. You could therefore suffer severe injuries or death in an accident. Please

check regularly that the seat belts are not damaged and not contaminated. Always have damaged

seat belts or those stressed in an accident renewed by an authorised workshop.

Fig. 56:

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

HAKO Citymaster 650, Руководство по эксплуатации, Страница: 68 / 190

Результаты поиска

Содержание Citymaster 650

Отзывы: