HAKO 147015 Скачать руководство пользователя страница 93

Страница: 93 / 190

03-147015-00-00.fm

Operation

3.6 Working with attachments

Danger

•

Danger to life in the danger area of the vehicle! Special caution is required under the raised tipper,

in the area of the front and rear attachment and in the area of the trailer.

•

Risk of injury! Put the attachment into service only if all protective devices are attached and in

protection position.

•

Risk of injury! Make sure that the attachments are suitable for the set oil volume. An oil volume set

too high can lead to injuries due to a defect of the attachment!

•

Risk of injury! High-pressure hoses, fittings and couplings are important for equipment safety. Use

only high-pressure hoses, fittings and couplings recommended by the manufacturer.

•

Risk of accident! When connecting attachments to the hydraulic system, ensure that the hydraulic

hoses are connected correctly. Swapping the connections can lead to reverse functioning of the

attachment, e.g. movement to the right rather than the left.

•

Risk of accident! Front attachments not correctly fastened to the front tool carrier can drop down

while driving. Always secure the front attachment with the locking devices.

•

Risk of accident! You must consult Hako before attaching other attachments not approved by

Hako! Check in the individual case that the relevant axial loads and total weights are complied

with.

•

Risk of accident! Handling, steering and braking as well as stability are influenced by attachments,

trailers and the vehicle payload (e.g. full dirt hopper). For this reason, pay attention to adequate

steering and braking capability as well as stability.

•

Risk of accident! In Germany, if attachments extend beyond the outer lighting equipment of the

vehicle or if the maximum distances of the outer lighting equipment specified according to StVZO

are exceeded, the lighting equipment of the vehicle must be repeated (see Merkblatt StVZO § 30,

explanations 11 and 12).

Содержание 147015































































































































































































Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды

HAKO 147015, Руководство по эксплуатации

Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды